Installation Instructions

 

500 SERIES FIXTURES USING KNURLED BRASS THUMBSCREWS

The fixtures are designed for standard electrical boxes with 3.5” center-to-center holes tapped for 8-32 screws.  For other conditions, please use a custom Rosette. 

If using the adapter plate, slip the leads through the center and attach to the socket.  Align the socket keyhole openings, small ends, with the adapter plate holes, align with electrical box screw holes.  Attach using the enclosed threaded rod.  Remove the knurled brass thumbscrews, slip the porcelain fixture over the rods and reattach the thumbscrews.  Do not over-tighten either rods or thumbscrews. 

To be installed by a licensed electrician.

DOWNLOAD 500 SERIES INSTALLATION INSTRUCTIONS

 

600 SERIES FIXTURES USING KNURLED BRASS THUMBSCREWS

The fixtures are designed for standard electrical boxes with 3.5” center-to-center holes tapped for 8-32 screws.  For other conditions, please use a custom Rosette. 

Hold the mounting plate to the electrical box, aligning either pair of inner holes with those on the box.  Mark a pair of outer holes on the ceiling or wall.  Make pilot holes, as the mounting screws will extend beyond the back of the mounting plate.

Slip the leads through the center of the mounting plate, and attach the plate to the electrical box.  Align the socket keyhole openings, small ends, with the plate holes, align with electrical box screw holes.  Attach using the enclosed threaded rod.  Remove the knurled brass thumbscrews, slip the porcelain fixture over the rods and reattach the thumbscrews.  Do not over-tighten either rods or thumbscrews. 

To be installed by a licensed electrician.

DOWNLOAD 600 SERIES INSTALLATION INSTRUCTIONS